Steel Chain Fencing - Mesh Fencing - Chain Link Fencing - Barbed Wire Fencing - Gates and Wire Fencing - Heavy Mesh Fencing - Telescoping Fencing - Metal Lath

A chain-link fence 

 is a type of woven fence usually made from galvanized or LLDPE-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.

Barbed Wire Fencing

Barbed wire, also known as barb wire, occasionally corrupted as bobbed wire or bob wire, is a type of steel fencing wire constructed with sharp edges or points arranged at intervals along the strands. ... Barbed wire fencing requires only fence posts, wire, and fixing devices such as staples.

Telescopic slide gates

Telescopic slide gates are ideal for areas where there is limited space for the gate when it is open. A telescopic gate has two or more gate leaves that slide in next to each other when in the open position, and slide out to secure the driveway when closed. These gates are suited for areas such as basement or underground carparks, curved fence lines, narrow allotments and any area where there isn’t enough room for a single slide gate.

Sheet Metal Lath – Diamond Metal Lath and Rib Metal Lath

Stucco, plaster and veneer would easily crack under types of stress and deflation in the process of building construction and residential living. Metal lath is used to prevent or decrease wall crackings in either pumped or troweled application. Sheet metal lath is slit and expanded into small diamond openings (approximately 11,000 per square yard).

We supply sheet metal lath in two types: diamond metal lath and rib meta lath. Flat diamond metal lath is nor used over solid surface like gypsum, concrete and wood sheathing. Because flat sheet will only cause the stucco to bond only to the sheathing and not complete the embedding process. Therefore expanded metal mesh is usually self-furred: dimpled and V-grooved. Diamond metal lath, for its unravel feature, is especially suitable for high strength needed architectures. Rib metal lath is expanded metal made sheet with ribs to increase the strength of it overall structure. Strip lath and corner lath are also available for installation convenience.

Diamond Metal Lath:

Flat diamond metal lath could only bond to the sheathing but not complete the embedding process for covering a solid surface like gypsum, concrete and wood sheathing. Therefore self-furring metal lath came into being. Self-furred diamond metal lath is generally used as reinforcement of plaster for solid surface. And it is divided into two types: dimpled and V-grooved. The two kinds of diamond metal lath is showed below in DML-01 and DML-02.

Diamond metal lath with dimples shapes.

Diamond metal lath with V