FIBERFORCE

PRODUCTS

• PRODUCTS PRO

FiberForce materials range is constantly growing.
Dimensional tolerance close to excellence guarantees exceptional performance and reliability.

NYLFORCE CARBON

 

Filament composed by a tough nylon reinforced with a high content of carbon fibres, it’s perfect for precise and stable prints of objects that need to resist to high-temperatures, strains and impacts.
Despite being engineering grade and abrasive material, it is easy to print with the most common desktop printers. It is a special professional material unique in its kind.

 

PRINTING SETUP

NYLFORCE GLASS

 

Filament composed by nylon charged with glass fibres, allows precise prints and it’s a great choice for technical and mechanical purposes. It has a noticeable tensile strenght and stiffness, over a very high impact strength.
Despite being engineering grade and abrasive material, it is easy to print with the most common desktop printers.

 

PRINTING SETUP

MURANO PA-GF

 

Murano PA-GF is the name of a small island in the Venetian lagoon, which in the past held the world monopoly of excellent glassmaking for several centuries. Murano PA-GF is the formulation 2.0 of our well known Nylforce Glass Fiber, implemented by our engineers. This formulation, indeed increased % of real glass fiber infused and heat resistance.

Available on multiple colors (also customized and exclusive).

 

 

NYLON CUBE

“Nylforce Cube” is an easy-to-print nylon grade.  Taking advantage of nylon’s strength, flexibility, and durability, technicians use this 3D printing filament to create tools, functional prototypes, or mechanical parts.

Printable at low temperature (240/245°C) it’s optimized to avoid the use of a heated chamber.

 

 

PET

Engineering grade polyester PET compound, showing superior bed adhesion, excellent at bridging as well as retraction, and keeping printed parts clean without any need of post-processing.

It features  higher mechanical strength and printing precision than any kind of ABS, but prints as easy as PLA.

FiberForce provides an wide range of PET colors continuously extending.

 

ABS PRO

ABS PRO is a premium filament that features low warping, excellent surface finishing, and allows very tight dimensional tolerances.

Available in several colors.

Its special formulation falls down bad smells and it is adopt both by makers to professional users.

 

SMART ABS

SMART ABS is a professional ABS based material, super performing in a large-spectrum of applications.

Provides benefits such as high heat resistance and direct printing on heated glass or printed surface.

It is the best experience when you use support materials. 3 key words defines it perfectly: TRUSTY – FRIENDLY – EFFICIENT.

 

PLA PRO HT

PLA PRO HT is a professional grade PLA compound.

Once post annealed (110°C in oven for 20 minutes) it reaches superior mechanical and temperature resistance and temperature resistance.

This material brings the user to have much higher performances when compared to ABS, but printing as easy as common PLA.

 

CONDUCTIVE

It’s a biopolymer compound,  based on CarbonNanoTubes (CNT) technology. So far, it’s indeed the most conductive material available on the market (4 times less resistive than our competitors’).

10cm length of a 1.75mm filament shows a resistance of 0.75 kohm. A post printing crystallization through annealing makes it achieve 100 °C heat resistance.

 

H-TECK

Engineering grade compound developed to fill the gap between our Nylon carbon/glass and Ultem/PEEK. An evolution among high technical materials, printing temperature is tipically around 300°C on professional printers.
It features an increased temperature resistance, incredible resilience as well as mechanical and impact resistance.

 

GHOSTFORCE

Ghostforce is a revolutionary hydrosoluble support material.  It’s not moisture-sensitive, allowing very long prints without any issue (basic PVA causes hydrolysis after short time printing).

It’s compatible with the most common technical polymers, including our nylon based Nylforce Carbon Fiber and Glass Fiber

 

 

 

• PRODUCTS MAKER

Compatible and easy to print with the most common professional and desktop printers.
Quality and precision contribute to make exclusive prints.

PLA HIGH QUALITY

The most important feature of this filament is being easy to print and compatible with all the printers available on the market.
Fiber Force actually provides an incredible range of PLA colors continuously extending.

Differently by common oil derivative polymers, PLA is obtained from biological resources, is biodegradable under proper conditions and has really low environmental impact.

 

ABS

Fiber Force’s ABS is characterized by an excellent impact resistance and a low shrinkage rate.

ABS (Acrylonitrile-Butadiene-Styrene), is a thermoplastic material that finds a wide use in general industry because of its excellent impact resistance and processability.

Differently from PLA, ABS tends to warp while cooling down, so we warmly suggest to use it on printers with heated bed.

 

FUSION-X

Engineering grade polyester PET compound, showing superior bed adhesion, excellent at bridging as well as retraction, and keeping printed parts clean without any need of post-processing.

It features higher mechanical strength and printing precision than any kind of ABS, but prints as easy as PLA.

FiberForce provides an wide range of FUSION-X colors continuously extending.

 

FIBERWOOD

FiberForce ‘s fiberwood is a filament composed by a modified polylactic acid (PLA) charged with real wood dust.
With a special smell of wood while printing and at temperatures around 200°C, this material has been developed for
revolutionary and refined wooden prints. Being based on our High Speed PLA, it’s suitable for high speed printing.

 

ABS PRO

ABS PRO is a premium filament that features low warping, excellent surface finishing, and allows very tight dimensional tolerances.

Available in several colors.

Its special formulation falls down bad smells and it is adopt both by makers to professional users.